uintah banner
A DoE Advanced Simulation and Computing (ASC) Center

C-SAFE was officially decommissioned in November, 2010. However, there are a number of continuing projects built upon the C-SAFE legacy. These include the Uintah project, the University of Utah's Institute for Clean and Secure Energy's (ICSE) NNSA project, the Army Research Laboratory's Uintah-CRA, and the The Carbon-Capture Multidisciplinary Simulation Center (CCMSC).

The Center for the Simulation of Accidental Fires and Explosions, created through the Department of Energy's Advanced Simulation and Computing (ASC) Program, employed a large number of a highly skilled faculty, research scientists, staff, and students who created the Uintah Computational Framework (UCF) software. For over a decade C-SAFE produced cutting edge research in simulating complex physical phenomena including reacting flows, material properties, multi-material interactions, and atomic level chemistry. Additionally, pioneering work was done in the field of parallel computing, software frameworks, and visualization.

Some of the many contributions C-SAFE scientists have made include detailed research into large eddy simulations (LES) of reacting flows, immense combustion simulations, heat transfer studies, validation and verification with uncertainty quantification of simulation results, methods for modeling radiation in complex fire simulations, expansion and validation of the material point method (MPM), advanced chemical models of soot formation and deposition, and composite material modeling. Furthermore, the physcial science research has been greatly augmented by the underlying software framework on top of which it is developed.

Scaling to tens of thousands of processors (or more), the Uintah software continues to be refined and updated. The development of the UCF continues through a number of supplemental funding sources due to the utility of the software. While developed primarily to run fire/container interaction simulations, Uintah has been straighforwardly applied to many other diverse applications, including simulations of blood vessel growth, foam micro-structure, human torso dynamics, industrial flares, vehicle armor plating, and oil drilling applications.


Director - C-SAFE

David W. Pershing - Senior Vice President of Academic Affairs
Phone: (801) 585-3277
Fax: (801) 585-3312
This email address is being protected from spambots. You need JavaScript enabled to view it.

Associate Director - C-SAFE

Charles A. Wight - Dean of Graduate School
Phone: (801) 581-8796
Fax: (801) 585-6749
This email address is being protected from spambots. You need JavaScript enabled to view it.

Executive Assistant - C-SAFE

Catrina Wilson
Phone: (801) 585-1233
Fax: (801) 585-1456
This email address is being protected from spambots. You need JavaScript enabled to view it.

Historical Personnel List

Center Leadership

David Pershing - PI, Director, Chris Johnson - Co-PI, Chuck Wight - Associate Director / High Energy Transformations, Philip J. Smith - Fire Spread, Martin Berzins / Chuck Hansen - Computer Science, James Guilkey - Container Dynamics, Eric Eddings - Validation, Grant Smith - Molecular Fundamentals

Key Personnel

Steve Parker, Todd Harman, Jeremy Thornock, J. Davison de St. Germain, Justin Luitjens, John Schmidt

C-SAFE Participants

Chakravarthy Ayyagari, Biswajit Banerjee, Dmitry Bedrov, James Bigler, Stanislav Borodai, Oleg Borodin, William Ciro , Imroz Choudhury, Christiaan Gribble, Yajun Guo, Tom Henderson, Tara Henrikson, Lam Huynh, Sergey Izvekov, Neelima Jannumahanthi, Jeramie Jergins, Andrew Kensler, Mike Kirby, Gautham Krishnamoorthy, Niveditha Krishnamoorthy, Seshadri Kumar, JoAnn Lighty, David O. Lignell, Nathan Marsh, Randall McDermott, Pat McMurtry, Qingyu Meng, Chris Merrill, John Nairn, Diem Nguyen, Vincent Pegoraro, Ignacio Preciado, Chandrasekhar Rakurty, Rajesh Rawat, Ambalavanan Sachidanandam, Adel F. Sarofim, Siddharth Shankar, Sameer Shende, Christopher Sikorski, Grant Smith, Jennifer Spinti, Naporn (Joy) Sroykum, Abe Stephens, Mohit Tandon, Ann Torrence, Lethuy Tran, Arun Venkatnathan, Angela Violi, Greg Voth, Jun Wang, Jeffrey A. Weiss, Megan Wilson, Bryan Worthen, Changwei Xiong, Liping Xue, Shihong Yan, Zhiwei Yang, Devin Yeates, Wing Yee, Hongzhi Zhang


The following publications provide a good starting place for learning about C-SAFE work and the Uintah simulation infrastructure:

  • Heat Transfer to Objects in Pool Fires, J.P. Spinti, J.N. Thornock, E.G. Eddings, P.J. Smith and A.F. Sarofim. Transport Phenomena in Fires, ed. by M. Faghri and B. Senden, Series: Developments in Heat Transfer, Vol 20, WIT Press, Southampton, U.K., 2008. Book Chapter, published, 2008.
  • An Eulerian-Lagrangian Approach for Simulating Explosions of Energetic Devices, Guilkey, J.E.; Harman, T.B.; Banerjee, B. Computers and Structures, 85, 660-674, 2007.
  • Scalable Parallel AMR for the Uintah Multiphysics Code, Luitjens, J.; Worthen, B.; Berzins, M.; Henderson, T. Petascale Computing Algorithms and Applications, Chapman and Hall, 2008.

For a listing of all C-SAFE publications visit the our Publications page.

Executive Summary

The University of Utah has created an alliance with the DOE Advanced Simulation and Computing (ASC) program to form the Center for the Simulation of Accidental Fires and Explosions (C-SAFE). It focuses specifically on providing state-of-the-art, science-based tools for the numerical simulation of accidental fires and explosions, especially within the context of handling and storage of highly flammable materials. The objective of C-SAFE is to provide a system comprising a problem-solving environment in which fundamental chemistry and engineering physics are fully coupled with non-linear solvers, optimization, computational steering, visualization and experimental data verification. The availability of simulations using this system will help to better evaluate the risks and safety issues associated with fires and explosions. Our team will integrate and deliver a system that will be validated and documented for practical application to accidents involving both hydrocarbon and energetic materials.

Although the ultimate C-SAFE goal is to simulate fires involving a diverse range of accident scenarios including multiple high-energy devices, complex building/surroundings geometries and many fuel sources, the initial efforts will focus on the computation of three scenarios:
  • Rapid heating of a container with conventional explosives in a pool fire (e.g., a missile involved in an intense jet-fuel fire after an airplane crash)
  • Impact and ignition of a container with subsequent explosion and firespread (e.g., shelling of a mine storage building by terrorists)
  • Heterogeneous fire containing a high energy device (e.g., ignition of a containment building in a missile storage area)

These large-scale problems require consideration of fundamental gas and condensed phase chemistry, structural mechanics, turbulent reacting flows, convective and radiative heat transfer, and mass transfer, in a time-accurate, full-physics simulation of accidental fires. This simulation will be expansive enough to include the physical and chemical changes in containment vessels and structures, the mechanical stress and rupture of the container, and the chemistry and physics of organic, metallic and energetic material inside the vessel. We will include deflagration-to-detonation transitions (DDT) of any energetic material in the fire, but the simulation will end when/if detonation occurs. C-SAFE will provide coupling of the micro-scale and meso-scale contributions to the macroscopic application in order to provide full-physics across the breadth of supporting mechanistic disciplines, and to achieve efficient utilization of ASC program supercomputers.

We will utilize a simulation development roadmap (SDRM) consisting of three distinct, sequential steps, which parallel the events in our physical problem: Ignition andFire Spread, Container Dynamics and High Energy Transformations. A fire or explosion is initiated by an ignition which depending upon the magnitude of heat generation and dissipative terms, a perturbation by an ignition source either decays or grows into a flame, followed by a spreading fire and possibly explosion. The fire or explosion can cause the container of HE material to undergo changes, perhaps rupture and, simultaneously or sequentially, the HE material itself can undergo transformations which lead to an explosion. The overall mission is to integrate these computational steps into a coupled fire and explosion system. To fulfill this mission we will draw on three core disciplines available at the University: molecular fundamentals, computational engineering, and computer science.

The thrust of the molecular fundamentals team will be to perform micro-scale analyses of physical and chemical processes. To this end, they are concerned with aspects of molecular dynamics, electronic structure, and statistical mechanics in an integrated fashion to dynamically obtain properties for all materials (condensed phases, vaporized phases, and structures) in the fire and explosion. The thrust of the computational engineering team is to develop meso-scale models that bridge the ranges of length and time scales between microscopic and macroscopic properties. They will also develop large-scale Eulerian and Lagrangian models to describe structural and transport processes with geometric and mechanistic fidelity. The computer science effort will focus on a system development framework which combines target architecture performance analysis tools at the lowest level with an integrated, higher level scientific problem solving environment to provide interactive computational steering, visualization and large data set analysis capabilities.

Twenty key U of U faculty have joined with strategically selected faculty from nearby BYU(2) and WPI(1) and experimental scientists from Thiokol Corporation to create C- SAFE. Twenty-five post doctoral/professionals and many graduate students are involved in the interdisciplinary academic program of the center. Because of the problem complexity, the personnel are organized in two types of interdisciplinary teams with a matrix structure: 1) three SDRM Step Teams that are each charged with the development of one subset of the overall application, and 2) four Discipline Teams that are responsible for the fundamental science/engineering of each discipline. Each C-SAFE participant (faculty or student) is a member of one of the discipline teams. The SDRM step teams are composed of the area leader from each of the disciplines and other key participants from within the disciplines. Thus, each center participant is a member of both types of teams. We believe this tightly integrated structure is essential to simultaneously ensure that (1) the common objective of developing a verified, fire and explosive simulation system is attained and (2) modern scientific/computational techniques are used throughout. Decisions regarding selection of key components to integrate into each step will be based on nonlinear sensitivity analysis and numerical optimization of our overall accidental fire simulation. Our delivered product will be the C-SAFE system that embodies the complete technology for performing integrated and validated simulations of full-physics fires.

Our C-SAFE system requires a computational infrastructure that can support multi-physics modeling of large- scale, complex phenomena. C-SAFE models the physical complexities from the molecular level of HE materials, through millimeter-sized representations of the container, to the meter-sized representations of the fire spread. At each of these levels, the simulations will involve up to 10^9 discrete mesh points. Due to the multiple scales, the spatial requirements may exceed the Terabyte range for the full simulation. The computation will also require 10^10 time-steps to compute the physical time scales ranging from microseconds to minutes or hours. Thus the storage requirements far exceed the capacities of most computing facilities. Not only are the memory and storage requirements at the terascale, the computational demands are also on the order of tens to hundreds of teraflops. When these requisites are compounded with the visualization needs, successful realization of the C-SAFE system involves dataset management, model building, simulation, and visualization at the Terascale level.

The C-SAFE system will be validated by rigorous comparison with experimental data for a variety of conditions at four different levels:
  • Fundamental rates and submodels
  • Individual and coupled SDRM steps
  • Well-defined, integrated multistep experiments
  • Actual, full-scale fires and explosions

Initially, the primary focus will be on utilizing existing data, especially from the National Labs and Thiokol. Because it is inevitable that additional, detailed data will ultimately be required to validate the C-SAFE computations, a new integrated fire test facility will be created on-site using University cost sharing funds to directly support this program. In later years, limited large-scale supplemental testing with high energy materials will also be conducted at Thiokol. The University of Utah is ideally suited to create this center because it is just completing construction of a new, interdisciplinary scientific computations building, the planned home for C-SAFE and more than half of the proposed participants. We have recently been named the site of the first SGI Center for Visual Supercomputing which means that the C-SAFE teams will likely have direct, on-site access to both a 60 CPU Origin 2000 with eight Infinite Reality Graphics Engines and a 64 node IBM SP with 13 Gbytes of memory. The faculty have extensive, proven background in the microscopic modeling of static and dynamic condensed phase systems; visualization, parallel architectures, and object-oriented scientific programming and macroscopic modeling of combustion and reactive-flow processes. The NSF-funded Advanced Combustion Engineering Research Center is just completing 11 years of operation and the University is home to the world-renowned Henry Eyring Center for Theoretical Chemistry.